MOSO dimmable LED Driver is designed for various types of exterior or industrial LED lighting, including LED roadway lighting, LED street lighting, LED flood lighting, LED highbay lighting, LED high mast lighting, LED architecture lighting, etc. The driver is compliant to all 0~10V and PWM dimming controllers, dimming systems, and smart control systems.
All dimmable LED Drivers comes with compact size and IP67 protection. So the same driver can be used for independent or built-in a waterproof power supply chamber. There is no limitation of the IP rating of the luminaire housing.
The ProgrDimmable LED Driver operates in constant current model. There are two types dimmable LED drivers available in MOSO: 1) Programmable Dimmable LED Driver, or constant current dimmable LED driver.
A programmable dimmable LED driver can be monitored by an infrared-based programming device, to deliver different output current and voltage values to LED modules. With one driver, you can use it for different light fixture designs. The fully programmed drivers offer all dimming options (0-10V/PWM/Timing
A constant current dimmable LED driver will only deliver fixed output current, you are not able to change the Iout like a programmable driver. The driver is competible with 0-10V / PWM / DALI dimming prootcols.
The compact metal case and high efficiency
enables the power supply to operating with high reliability, and extending
product lifetime to at least 50,000 hours. Overall protection is provided
against lightening surge, output over voltage, short circuit, and over
temperature, to ensure low failure rate.
MOSO grants the product with 5 years global warranty. Customer can refer
to Warranty policy, find the closest MOSO distributors or sales
representatives, to get a local replacement in case of any failure.
Dimmable LED Driver Dimmable LED Driver,Dimmable LED Lighting Driver,Dimmable Slim LED Driver,Dimmable Tunnel Light LED Driver Moso Electronics , https://www.mosoleddriver.com
In addition to the use of Panasonic, Sony's TV and commercial displays, the OLED panels produced by the joint venture are also considered for sale to external manufacturers. Details of the joint venture's capital contribution and factory land use will be subject to subsequent negotiations.
Sony and Panasonic announced in June 2012 that they will work together to develop next-generation OLED panels for TV/large-size displays, with the goal of establishing mass production technology for next-generation OLED panels in 2013. This time, the plan is to expand the partnership from “R&D†to “production†to enhance international competitiveness. 
control/DALI) and a wide range of output current in a single driver, which
deliver maximum flexibility with customized operating settings and intelligent
control options for lighting manufacturers. The Programmable dimmable LED drivers obtained many global safety certifications,
including UL, CE, TUV, ENEC, CB, SAA, BIS, KC, etc, they are compatible with the safety regulations
in different countries.
Sony teamed up with Panasonic to produce OLED panels
Recently, the market has spread Panasonic and TV giant Sony plans to set up a joint venture to produce OLED panels. It is reported that Panasonic and Sony have already negotiated, and this OLED panel company will be established in 2013.