Lock Motor product introduction:
Intelligent Lock Motor, also known as
electronic locks, the product effectively combines the advantages of
traditional electronic locks and electromagnetic lock overcame the electric
lock too much noise, electromagnetic lock power shortage and the development of
new products, and spiritual compared with electric control lock and magnetic
locks, lock its performance more perfect, more obvious advantages.
Functions: it is widely used in various
intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock,
safe lock, hotel lock, family lock, inductive smart lock, etc
Features:Lock motor is based
on micro precision reducer development, small intelligent micro precision
reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks,
sensor intelligent lock;
This kind of motor has the characteristics
of low noise, low energy consumption, small volume, light quality, high
precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the lock motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc lock motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
lock motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Lock Motor Lock Motor,Intelligent Lock Motor,Smart Lock Motor,Fingerprint Lock Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
In the LED TV backlight module process, Yuanlisheng provides high-precision volumetric dosing valve dispensing solution LDM-300, weight control accuracy of +/- 1%, to ensure that the CIE yield of the fluorescent coating process is above 99%. At present, it has been verified in many LED manufacturers, and the production efficiency is higher than that of well-known international dispensing equipment. Yuanlisheng volumetric valve can be placed on the desktop (EDC-500/600) or fully automatic floor-standing machine (OED-585L). After the manufacturer completes the chroma color temperature process parameter verification on the desktop machine, Integrate the same valve control machine to the floor-standing machine to provide mass production for production units. The machine also provides a communication module, which can be connected in series with the color temperature test machine in the latter stage of the process. In the production process, the glue quantity parameter is corrected in real time according to the color temperature test data of the latter stage.
In the production process of the rear panel of the backlight panel, the LED SMD component placement for high-average optical rotation requirements, in addition to the SMD placement machine (EM-760L) which can provide proper BIN value control, Yuanlisheng has professional lens assembly equipment. EMP-310 ensures that the LED lens is glued accurately and without tilting, with an accuracy of 50μm or more. In the LED lighting process, Yuanlisheng EML series LED light strip special placement machine EML-61D, the machine body is much smaller than the general placement machine, the unique substrate transmission method, so that the system can be installed in the most affordable way, more than 1 meter 2 The light board is the only patch device in the world designed for long light board manufacturers. 
Yuanlisheng launches LED backlight and lighting process equipment
Yuanlisheng Precision Machinery aims to support the development of the LED industry in the Taiwan Strait, integrates the LED post-seal assembly process equipment developed in the factory for several years, and proposes a number of different process plans.