Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower

  • Model NO.: WXS-047
  • Standard: Nonstandard
  • Belly Bar Shape: Cross Type
  • Condition: New
  • Height: According to Customer′s Drawing
  • Transport Package: Standard Exporting Package
  • Origin: Jiaozhou, Qingdao
  • Structure: Four-Post Angle Tower
  • Material: Angle Steel Tower
  • Certification: ISO
  • Anti-Corrision Menthond: Hot-DIP Galvanization or Painting
  • Trademark: WUXIAO
  • Specification: according to the design
  • HS Code: 73082000
Roof Top Steel Tower/telecom tower/guyed tower/microwave tower
Specifications
 
roof top tower 
Welding: CO2 welding or Submerged arc auto methods 
hot-dip galvanized 


 
Qingdao Wuxiao Group Co., Ltd can produce every type of Roof Top Tower. It is always used the materials such as angle steel or tubular steel. And its function is used as collecting can transmissing signal or network.
Performance Standard 
Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the related standards (Chinese Standards). 
Welded requirements: 
1 We used CO2 welding and submerged arc auto welding or other methods. 
2 Welded seam shall be full penetration and grinded. 
3 The welded product has no fissure, scar, overlap, layer or other defects. 
Galvanization: 
All components are dip-hot galvanized with uniform. 
Certification: 
We also supply Factory accept test, Warranty certification, Certificate of product quality 
Certification of Quality Management System
 
Part of Fabrication equipments:
 
Hot-dip Glavanizing
 
 
 
Trial Assembly:
 
Qingdao Wuxiao Group established in 1993 located in Jiaozhou,Qingdao which is not far from Qingdao Port. After 20 years' development, our scale, technology and strength are all top levels among the same industries. We look forward to cooperate with you.
 
Shirley Yan
Height From 9 meter to 268 meter
Suit for Electric Power Transmission and Distribution
Shape Angle
Material Normally    Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
              Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400
   
Tolerance
of the dimension		 According to your  requirement.
Surface treatment Hot dip galvanized Following ASTM A 123, or any other standard by client required.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um)
Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) 
Joint of Section bolts and nuts.
Standard ISO 9001:2008
Length of per section According to your request.
Welding Standard AWS (American Welding Society ) D 1.1
CO2 welding or Submerged arc auto methods
Thickness 4mm  to 55mm
Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages
Capacity Product Annual Production Capacity(TON) Monthly Production Capacity(TON)
1 Tubular Tower  120000 10000
2 AngleTower 120000 10000
3 Steel Structure 60000 5000
4 Total Production Capacity 120000 10000
Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower

Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower
Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower
Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower
Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower
Roof Top Steel Tower/Telecom Tower/Guyed Tower/Microwave Tower
 

Led Flood Light

Wall Mount Light Fixture ,Wall Mounted Lamps ,LED Canopy Light,Led Flood Light

LED Light Co., Ltd. , http://www.nblellight.com