caveat: When the input is shorted to the ground or VBAT , pay attention to the static current, especially the analog input circuit. Potential problems : When a short circuit is applied, the power loss of the resistor is higher than the maximum power allowed by the resistor, taking into account the derating factor. Preventive measures : Ensure that the resistors can support the power supply and ensure the entire voltage and temperature range power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged. Power+ Signal Power Connector ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively
Product features
High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material
Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm
The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A