Descriptions for velcro braided sleeves:
1. Velcro Braided Sleeving offers innovative solutions for the protection of breakout areas
and provides easy removal when is necessary an inspection or maintenance of cables.
2. The special open structure allows to be installed after other components, for example copper terminals and connectors.
3. A strong resilience protects wires and cables and meanwhile provides exceptional abrasion and flame resistance.
· DURABLE: Wire management sleeves are made with abrasion and flame resistant material.
· ADJUSTABLE: Protective cable covers are an ideal choice for all cords. They can be cut to any length to match your organization needs.
· SELF-CLOSING DESIGN: Self-closing cable socks make cable management quick and compact.
· EASY MANIPULATION: Cables can be easily added or removed from the braided sock.
• Easy, and effective installation
Characteristics of Velcro Cable Sleeve
1. Bundles cables at any point along the run, easily avoiding large connectors and plugs for quick and easy installation
3. Side entry design,easy to install or remove,time and labor saving
4. Flexible and Haogen free
5. Flame retardant
6. Acid,Oil and chemical resistant
7. Dust resistant and noise reduction
8. velcro trip can stick the other end tighter to hold the cables inside easily.
Velcro Cable Sleeve ,Velcro Braided Sleeve,Velcro Sleeve ,Expandable Split Wire Sleeve Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com
The cable is used to transmit power on the power transmission and distribution line of A.C. 50Hz, rated volt-age 35 KV or lower. By comparison with power cable with PVC insulation, it has not only excellent electric perfor-mance, mechanical performance, heat & aging resistant performance, weather resistant performance, chemical corrosion resistant performance, but also simple structure,light weight, no restriction by laying drop, and high tem-perature allowance for long term working(90ºC) as well.
Executive standard
As section "extruded insulation power cable with rated voltage from 1kV(Um=1.2 kV)to 35kV (Um=40.5 kV)" stipulated in GB/T12706.1-2002~ GB/ T12706.3-2002 or IEC60502-1997 according to the re-quirement of the customer.
Working Condition
1,Long-term working temperature by cable conducto is 90ºC.
2,Max. temperature of cable conductor shall be no more than 250ºC during short circuit (the longest lasting time shall be no more than 5 seconds).
3,Environment temperature for installation is no less than 0ºC.
4,Min bending radium of cable:
It is no less than 15 times that of cable outer diameter for cable with three cores.
It is no less than 20 times that of cable outer diameter for cable with single core.
5,A.C. rated voltage U0/U of cable is 0.6/1kV~26/35kV.
U0: rated A.C. voltage of conductor to earth OR between metallic shielding for cable designing, which is called phrase voltage.
U:rated A.C. voltage between conductors for cable designing, which is called wire voltage.
Um: Max endurable value of "Max system voltage"for cable
Type, Description and Application Occasion
Type
Description
Application n
Cu
Al
YJV
YJLV
XLPE insulation PVC sheath power cable
To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside
YJY
YJLY
XLPE insulation PE sheath power cable
YJV22
YJLV22
XLPE insulation, steel tape armor, PVC sheath power cable
To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.
YJV23
YJLV23
XLPE insulation, steel tape armor, PE sheath power cable
YJV62
YJLV62
XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable
YJV32
YJLV32
XLPE insulation, thin steel-wire armor, PVC sheath power cable
Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint
.
YJV72
YJLV72
XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42
YJLV42
XLPE insulation, thick steel-wire armor, PVC sheath power cable
Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.
Note:1: We also produce steel wire armored cross-linked power cable such as YJV32,YJLV32,YJV33,YJLV33 according to the requirement of the customer.
2: Prefi x "ZR" (flame retardant type) shall be added to the original type when flame retardant type cable is needed.
The Figure of Cable Structure
Production Scope
Production 
Â
35 kV or Lower Power Cable with XLPE Insulation
The cable is used to transmit power on the power transmission and distribution line of A.C. 50Hz, rated volt-age 35 KV or lower. By comparison with power cable with PVC insulation, it has not only excellent electric perfor-mance, mechanical performance, heat & aging resistant performance, weather resistant performance, chemical corrosion resistant performance, but also simple structure,light weight, no restriction by laying drop, and high tem-perature allowance for long term working(90ºC) as well.
Executive standard
As section "extruded insulation power cable with rated voltage from 1kV(Um=1.2 kV)to 35kV (Um=40.5 kV)" stipulated in GB/T12706.1-2002~ GB/ T12706.3-2002 or IEC60502-1997 according to the re-quirement of the customer.
Working Condition
1,Long-term working temperature by cable conducto is 90ºC.
2,Max. temperature of cable conductor shall be no more than 250ºC during short circuit (the longest lasting time shall be no more than 5 seconds).
3,Environment temperature for installation is no less than 0ºC.
4,Min bending radium of cable:
It is no less than 15 times that of cable outer diameter for cable with three cores.
It is no less than 20 times that of cable outer diameter for cable with single core.
5,A.C. rated voltage U0/U of cable is 0.6/1kV~26/35kV.
U0: rated A.C. voltage of conductor to earth OR between metallic shielding for cable designing, which is called phrase voltage.
U:rated A.C. voltage between conductors for cable designing, which is called wire voltage.
Um: Max endurable value of "Max system voltage"for cable
Type, Description and Application Occasion
Type
Description
Application n
Cu
Al
YJV
YJLV
XLPE insulation PVC sheath power cable
To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside
YJY
YJLY
XLPE insulation PE sheath power cable
YJV22
YJLV22
XLPE insulation, steel tape armor, PVC sheath power cable
To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.
YJV23
YJLV23
XLPE insulation, steel tape armor, PE sheath power cable
YJV62
YJLV62
XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable
YJV32
YJLV32
XLPE insulation, thin steel-wire armor, PVC sheath power cable
Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint
.
YJV72
YJLV72
XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42
YJLV42
XLPE insulation, thick steel-wire armor, PVC sheath power cable
Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.
Note:1: We also produce steel wire armored cross-linked power cable such as YJV32,YJLV32,YJV33,YJLV33 according to the requirement of the customer.
2: Prefi x "ZR" (flame retardant type) shall be added to the original type when flame retardant type cable is needed.
The Figure of Cable Structure
Production Scope
ProductionÂ
Â
• More flexible than split convoluted or spiral wrap
• 25% edge overlap
• Cut and abrasion resistant
• Halogen free
• Retains shape and rigidity throughout -50°C to 150°C temperature range
• melt temp. 250°C
2. Heavy duty polyester construction ensures great durability
High Tension Armored Cable Steel Wire Power Cable
Model NO.: YJV
Wire Core Material: Red Copper Wire
Certification: ISO
Model: YJV
Brand: Hufei
Conductor Material: Copper
Jacket: PVC
Armored: Sta or Swa
Nominal Voltage: 21/35-26/35kv
Voltage Test: 73.5kv/91kv
Partial Discharge Test: 1.73 U0
Trademark: Hufei
Transport Package: International Wooden Drum
Specification: CE
Origin: Shanghai
HS Code: 85444911
Model NO.: YJV
Wire Core Material: Red Copper Wire
Certification: ISO
Model: YJV
Brand: Hufei
Conductor Material: Copper
Jacket: PVC
Armored: Sta or Swa
Nominal Voltage: 21/35-26/35kv
Voltage Test: 73.5kv/91kv
Partial Discharge Test: 1.73 U0
Trademark: Hufei
Transport Package: International Wooden Drum
Specification: CE
Origin: Shanghai
HS Code: 85444911
35 kV or Lower Power Cable with XLPE Insulation