40Pin Ribbon Cable,Cable Ribbon,Flat Ribbon Cable,Custom Flat Ribbon Cable Electronic Cables,Electrical Wiring Harness Co., Ltd. , http://www.nbwireharnesses.com
1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.
3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.
Our Servies
WE ARE READY
Q: Do you offer OEM service?
A: Yes.
Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.
Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.
Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.
WHY CHOOSE US
WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
WorkingS2
S3
6/Â Â 6times/hour
FC
30Â 30minutes
60Â 60minutes
15%
25%
40%
Â
itemPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
ATm
Tn
Item frame1000r/min  synchronous speed 1000r/min
YZRÂ 112M
1.8
5.3
13.4
815
1.5
4.63
12.5
866
2.2
6.6
18.4
725
1.8
5.3
13.4
815
1.5
4.63
12.5
2.5
132M1
2.5
6.5
12.9
892
2.2
6.05
12.6
908
3.0
8
16.2
855
2.5
6.5
12
892
2.2
6.05
12.6
2.86
132M2
4.0
9.7
14.2
900
3.7
9.2
14.5
908
5
12.3
18.2
875
4
9.7
14.2
900
3.7
9.2
14.5
3.51
160M1
6.3
16.4
29.4
921
5.5
15
25.7
930
7.5
18.5
35.4
910
6.3
16.4
29.4
921
5.5
15
15.7
2.56
160M2
8.5
19.6
29.8
930
7.5
18
26.5
940
11
24.6
36.5
900.8
8.5
19.6
29.8
930
7.5
18
16.5
2.78
160L
13
28.6
31.6
942
11
24.5
27.6
957
15
34.7
39
920
13
28.6
31.6
942
11
24.9
27.6
2.47
180L
17
36.7
49.8
955
15
33.8
46.5
962
20
42.6
58.7
946
17
36.7
49.8
955
15
33.8
46.5
3.2
200L
26
56.1
82.4
956
22
49.1
69.9
964
33
62
68
942
26
56.1
82.4
956
22
49.1
69.9
2.88
225M
34
70
85
957
33
62
74.4
962
40
80
101
947
34
70
85
957
30
62
74.4
3.3
250M1
42
80
103
960
37
70.5
91.5
965
50
99
123
950
42
80
103
960
37
70.5
91.5
3.13
250M2
52
97
110
958
45
84.5
95
965
63
121
134
947
52
97
111
958
45
84.5
95
3.48
280S
63
118
142
966
55
101.5
129.8
969
75
144
169.5
960
63
118
142
966
55
101.5
119.8
3.0
280M
85
157
140
966
75
139
124
970
100
185
166
960
85
157
140
966
75
139
124
3.2
750r/min  synchronous speed 750r/min
YZRÂ 160L
9
22.4
28.1
694
7.5
19.1
23
705
11
27.5
35.3
679
9
22.4
28.1
694
7.5
19.1
23
2.73
180L
13
29.1
47.8
700
11
27
44
700
15
34
56
690
13
29.1
47.8
700
11
27
44
2.72
200L
18.5
40
67.2
701
15
33.5
53.5
712
22
48
81
690
18.5
40
67.2
701
15
33.5
53.5
2.94
225M
26
55
71.2
708
22
46.9
59.1
715
33
70
92
696
26
55
71.2
708
22
46.9
59.1
2.96
250M1
35
64
80
715
30
63.4
67.7
720
42
75
97.5
710
35
64
80
715
30
63.4
68.8
2.64
250M2
42
86
79
716
37
78
70
720
52
103
98
706
42
86
79
716
37
78.1
70
2.73
280S
52
108
106
712
45
96.5
92
717
63
129
130
704
52
108
106
712
45
96.5
92
3.17
280M
63
126
110
722
55
110.5
92.5
725
75
150
132
715
63
126
110
722
55
110.5
92.5
2.85
315S
85
164.8
177.8
722
75
146.7
156.7
725
100
200
162
715
85
164.8
177.8
722
75
146.7
156.7
2.94
315M
100
190
18.35
715
90
172
160.9
720
125
250
232
717
100
190
183.5
715
90
172
160.9
3.13
600r/min  synchronous speed 600r/min
YZRÂ 280S
42
92
177.1
571
37
84.8
153.2
560
55
112
235.2
564
42
92
177.1
571
37
84.8
153.2
2.80
280M
55
127
207
556
45
103.8
165
560
63
146
241
548
55
127
207
556
45
103.8
165
3.16
315S
63
132
161.9
580
55
118.3
138.7
580
75
154
194
574
63
132.5
161.9
580
55
118.3
138.7
3.11
315M
85
179
171
576
75
160
149.3
579
100
210
203
570
85
179
171
576
75
160
149.3
3.45
355M
110
232
246
581
90
192
198
585
132
284
299
576
110
232
246
581
90
192
198
3.33
355L1
132
265
256
576
110
224
207
582
160
324
314
571
132
265
256
578
110
224
207
3.1
355L2
150
292
238
588
132
278
206
588
185
374
296
585
150
292
238
588
132
278
206
3.4
1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.
3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.
Our Servies
WE ARE READY
Q: Do you offer OEM service?
A: Yes.
Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.
Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.
Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.
WHY CHOOSE US
WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
WorkingS2
S3
6/Â Â 6times/hour
FC
30Â 30minutes
60Â 60minutes
15%
25%
40%
Â
itemPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
An
r/minPn
KwI1
AI2
ATm
Tn
Item frame1000r/min  synchronous speed 1000r/min
YZRÂ 112M
1.8
5.3
13.4
815
1.5
4.63
12.5
866
2.2
6.6
18.4
725
1.8
5.3
13.4
815
1.5
4.63
12.5
2.5
132M1
2.5
6.5
12.9
892
2.2
6.05
12.6
908
3.0
8
16.2
855
2.5
6.5
12
892
2.2
6.05
12.6
2.86
132M2
4.0
9.7
14.2
900
3.7
9.2
14.5
908
5
12.3
18.2
875
4
9.7
14.2
900
3.7
9.2
14.5
3.51
160M1
6.3
16.4
29.4
921
5.5
15
25.7
930
7.5
18.5
35.4
910
6.3
16.4
29.4
921
5.5
15
15.7
2.56
160M2
8.5
19.6
29.8
930
7.5
18
26.5
940
11
24.6
36.5
900.8
8.5
19.6
29.8
930
7.5
18
16.5
2.78
160L
13
28.6
31.6
942
11
24.5
27.6
957
15
34.7
39
920
13
28.6
31.6
942
11
24.9
27.6
2.47
180L
17
36.7
49.8
955
15
33.8
46.5
962
20
42.6
58.7
946
17
36.7
49.8
955
15
33.8
46.5
3.2
200L
26
56.1
82.4
956
22
49.1
69.9
964
33
62
68
942
26
56.1
82.4
956
22
49.1
69.9
2.88
225M
34
70
85
957
33
62
74.4
962
40
80
101
947
34
70
85
957
30
62
74.4
3.3
250M1
42
80
103
960
37
70.5
91.5
965
50
99
123
950
42
80
103
960
37
70.5
91.5
3.13
250M2
52
97
110
958
45
84.5
95
965
63
121
134
947
52
97
111
958
45
84.5
95
3.48
280S
63
118
142
966
55
101.5
129.8
969
75
144
169.5
960
63
118
142
966
55
101.5
119.8
3.0
280M
85
157
140
966
75
139
124
970
100
185
166
960
85
157
140
966
75
139
124
3.2
750r/min  synchronous speed 750r/min
YZRÂ 160L
9
22.4
28.1
694
7.5
19.1
23
705
11
27.5
35.3
679
9
22.4
28.1
694
7.5
19.1
23
2.73
180L
13
29.1
47.8
700
11
27
44
700
15
34
56
690
13
29.1
47.8
700
11
27
44
2.72
200L
18.5
40
67.2
701
15
33.5
53.5
712
22
48
81
690
18.5
40
67.2
701
15
33.5
53.5
2.94
225M
26
55
71.2
708
22
46.9
59.1
715
33
70
92
696
26
55
71.2
708
22
46.9
59.1
2.96
250M1
35
64
80
715
30
63.4
67.7
720
42
75
97.5
710
35
64
80
715
30
63.4
68.8
2.64
250M2
42
86
79
716
37
78
70
720
52
103
98
706
42
86
79
716
37
78.1
70
2.73
280S
52
108
106
712
45
96.5
92
717
63
129
130
704
52
108
106
712
45
96.5
92
3.17
280M
63
126
110
722
55
110.5
92.5
725
75
150
132
715
63
126
110
722
55
110.5
92.5
2.85
315S
85
164.8
177.8
722
75
146.7
156.7
725
100
200
162
715
85
164.8
177.8
722
75
146.7
156.7
2.94
315M
100
190
18.35
715
90
172
160.9
720
125
250
232
717
100
190
183.5
715
90
172
160.9
3.13
600r/min  synchronous speed 600r/min
YZRÂ 280S
42
92
177.1
571
37
84.8
153.2
560
55
112
235.2
564
42
92
177.1
571
37
84.8
153.2
2.80
280M
55
127
207
556
45
103.8
165
560
63
146
241
548
55
127
207
556
45
103.8
165
3.16
315S
63
132
161.9
580
55
118.3
138.7
580
75
154
194
574
63
132.5
161.9
580
55
118.3
138.7
3.11
315M
85
179
171
576
75
160
149.3
579
100
210
203
570
85
179
171
576
75
160
149.3
3.45
355M
110
232
246
581
90
192
198
585
132
284
299
576
110
232
246
581
90
192
198
3.33
355L1
132
265
256
576
110
224
207
582
160
324
314
571
132
265
256
578
110
224
207
3.1
355L2
150
292
238
588
132
278
206
588
185
374
296
585
150
292
238
588
132
278
206
3.4
Yzr AC Slip Ring Crane Motor 45kw
Model NO.: yzr
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Crane Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H112~H355
Work Mode: S1
Protection Class: IP55
Insulation Class: F
Trademark: pinnxun
Specification: YZR
Origin: China
HS Code: 8501530090
Model NO.: yzr
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Crane Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H112~H355
Work Mode: S1
Protection Class: IP55
Insulation Class: F
Trademark: pinnxun
Specification: YZR
Origin: China
HS Code: 8501530090
YZR, YZ series metallurgical and crane ac induction motor