Olympus Japan (Headquarters: Tokyo) announced that it will lower the wholesale price of "REALTUBE" for straight tube type LED lighting (fluorescent type LED lighting) installed on fluorescent lamps, and the market price is estimated to be reduced to half of the original price. the following. The main product "OPJ-1200N" (equivalent to FLR40W fluorescent lamp) has an estimated market price of 9,800 yen, which is estimated to be 4,800 yen. However, Austria's bright Japan does not use direct sales, but sells through sales stores, so this is only an estimated price. REALTUBE uses the LED kit from Cree in the United States. In 2009, the sales of LED kits were greatly reduced by increasing sales, and the efficiency of the production line was improved by mass production, so that costs could be significantly reduced. When REALTUBE is installed on an existing fluorescent lamp, the power supply needs to be replaced, so the user needs to pay an additional engineering fee of 1,500 to 2,000 yen/root, but if the price drops to 4,800 yen/root, the power consumption is small. Therefore, the total cost (initial introduction cost and operating cost) can be lower than the operating cost of the quick-start fluorescent lamp in about 3 years. The original product took nearly 5 years to recover the initial cost, and the threshold for users to import the product was too high. Austria's bright Japanese straight tube LED lighting While adjusting the wholesale price, Austrian Bright will also hold two major promotions. One is the “high quality minimum price guarantee activityâ€. If the price is found to be higher than other companies with the same performance, it will be offered at a lower price than other companies' products. The other is "free 40 lamps, confirm quality activities", 40 products will be provided free of charge before the user is officially introduced, allowing users to experience performance and confirm quality in advance. According to reports, in 2009, REALTUBE sales in Japan reached 100,000. The company intends to further expand sales by holding two major promotions while reducing market prices.
Fence post driver size :600mm,750mm,800mm long
EPE wrapped then in cartons
Manual post hammer for Star Picket,T post,Y fence post
Pile Driver Also called Post driver
Our factory mainly manufacture and export Y fence post,Post driver,post hammer,and other accessories for farm post,ect.
Surface: hot-dip galvanized, Powder coated
Post driver available:
Light Duty Diameter (MM): 60mm; Length (MM): 600mm ;750mm; 800mm etc.
Light Duty Diameter (MM): 75mm; Length (MM): 600mm ; 750mm; 800mm etc.
Thickness: 3.0-4.0mm steel pipe
Packing: EPE wrapped then in cartons
Application:
Reduce work injury with this Post driver/Pile driver that easily driver steel posts into solid ground.
Pile Driver,Pile Driving Machine,Fence Post Driver,Post Driver BAODING JIMAOTONG IMPORT AND EXPORT CO., LTD , https://www.chinagroundscrew.com
pvc coated or hot dip galvanized
.
